Instructions for Use of Misting Nozzles

Misting Nozzle Sizes

Misting Nozzles can be sized based on specific usage needs and system requirements. Generally speaking, the size of the misting nozzles will affect the particle size and spray volume of the Misting.

Misting Nozzles Nozzle aperture Size

The aperture size of misting nozzles refers to the diameter of the opening through which water or mist is emitted，The misting nozzle aperture size can affect the misting effect, coverage, and water consumption. The appropriate aperture size should be chosen based on the specific requirements of your application

ORIFICE SIZE	.006″/.15mm	.008″/.20mm	.012″/.30mm	.016″/.40mm
THREAD SIZE	12/24 standard, 10/24, 1/8 available	12/24 standard, 10/24, 1/8 available	12/24 standard, 10/24, 1/8 available	12/24 standard, 10/24, 1/8 available
ILLUSTRATE	The smallest standard nozzle orifice available. At 1,000 psi, the mean diameter of the droplets from this size orifice are 12.2μ with droplets ranging from 1.2μ to 36.4μ and a spray diameter of approximately 45 degrees. The .006″/.15mm misting nozzle is ideal for applications requiring extremely low flow with small droplet size and minimal moisture. It is most commonly used for humidification applications. This nozzle is not designed to be used at pressures below 500 psi.	The next-smallest standard nozzle orifice available. At 1,000 psi, the mean diameter of the droplets from this size orifice are 12.7μ with droplets ranging from 1.4μ to 37.9μ and a spray diameter of between 60 and 65 degrees. The .008″/.20mm misting nozzle is ideal for applications requiring low flow with small droplet size and limited moisture. It is most commonly used for humidification and cooling applications. This nozzle is not designed to be used at pressures below 250 psi.	The medium-sized standard nozzle orifice. At 1,000 psi, the mean diameter of the droplets from this size orifice are 13.1μ with droplets ranging from 1.6μ to 39.1μ and a spray diameter of between 65 and 75 degrees. The .012″/.30mm misting nozzle is ideal for applications requiring moderate flow with small droplet size. It has a similar performance to the .008″/.20mm orifice nozzle with an increased flow rate. It is most commonly used for outdoor cooling and odor/dust control applications. This nozzle can be used with any pressures above 100 psi.	A larger-sized nozzle orifice. At 1,000 psi, the mean diameter of the droplets from this size orifice are 14.8μ with droplets ranging from 3.8μ to 47.9μ and a spray diameter of between 70 and 80 degrees. The .016″/.40mm misting nozzle is ideal for applications requiring increased flow rates with moderately sized droplets. It is most commonly used for special effects and outdoor dust control applications. This nozzle can be used with any pressure.
Application	Fans in areas with high humidity.	Indoor humidification, outdoor cooling. Cooling people, indoors or out	Cooling people in areas with extreme heat and low humidity or where the nozzles are placed high above the area to be cooled	Outdoor applications

Misting Nozzles Nozzle diameter

The diameter of the nozzle determines the flow rate and atomization effect of Misting. Common nozzle diameter sizes include 1/8 inch, 1/4 inch, 3/8 inch, etc. Smaller diameters are generally used for fine mist spraying, while larger diameters are suitable for large-volume spraying.

Misting Nozzle angle

The nozzle angle of misting nozzles refers to the direction in which the mist is emitted from the nozzle. Different nozzle angles can provide different spray patterns and coverage

45 degrees: This angle provides a wider spray pattern, covering a larger area. It is often used for general misting applications, such as outdoor cooling or patio misting

25 degrees: This angle provides a more focused spray pattern, ideal for targeted misting or specific areas that require more precise coverage

15 degrees: This angle provides a narrow spray pattern, suitable for applications that require concentrated misting, such as spot cooling or misting in small spaces

Distance Between Mister Nozzles

When spacing misting nozzles, it is generally recommended to keep them 2 to 3 feet apart for even coverage and distribution of mist. Misting lines can be installed either at the perimeter of the cooled space or brought inside the space, depending on the specific requirements and design of the misting system. It is important to consider factors such as the layout of the space, the desired cooling effect, and the specific needs of the area when determining the placement and spacing of misting nozzles

To calculate the distance between two Mister nozzles, you would need to know the coordinates or positions of each nozzle. Once you have the coordinates, you can use the distance formula to find the distance between them.

The distance formula is:

d = sqrt((x2 – x1)^2 + (y2 – y1)^2)

Where (x1, y1) and (x2, y2) are the coordinates of the two nozzles.

Plug in the coordinates into the formula and calculate the distance.

Our Selection of Misting Nozzles

If you live where temperatures are higher, we recommend using a .016″/.40mm nozzle. The same recommendation if you install the line around 10 feet because our fine mist evaporates easily and you need more water in the air to fill a larger space with the cool evaporative mist.

• Best Water Saving Misting Nozzles: Brass Nozzle 0.016” Orifice/0.4 mm
• Best Affordable Kit： Mist Parts Accessories. 0.016″ Orifice (0.4 MM) 10/24 Unc 20Pcs

Best Water Saving Misting Nozzles: Brass Nozzle 0.016” Orifice/0.4 mm

Brass misting nozzles with a 0.016″ orifice size (0.4 mm) are indeed a great choice for water-saving purposes. These nozzles are designed to produce a fine mist that efficiently cools the surrounding area while using minimal water

• Precise Water Distribution: The small orifice size allows for precise water distribution, ensuring that every drop is utilized effectively. This helps to minimize water waste and achieve maximum cooling efficiency.
• Fine Mist Production: The fine mist produced by these nozzles evaporates quickly, providing effective cooling without excessive water usage. This feature is especially beneficial in hot and arid climates where water conservation is crucial
• High-Quality Material: Brass misting nozzles are known for their durability and resistance to corrosion. This means they have a longer lifespan compared to other materials, reducing the need for frequent replacements and minimizing waste

Best Affordable Kit： Mist Parts Accessories. 0.016″ Orifice (0.4 MM) 10/24 Unc 20Pcs

The Mist Parts Accessories kit with 0.016″ orifice (0.4 mm) and 10/24 UNC thread is an excellent choice for an affordable misting system. This kit typically includes 20 misting nozzles, making it suitable for a variety of misting applications such as outdoor cooling, greenhouse humidification, or patio misting

• Cost-Effective: The kit offers good value for money, providing 20 misting nozzles at an affordable price. This allows for adequate coverage and flexibility in setting up your misting system without breaking the bank
• Efficient Water Usage: With a 0.016″ orifice size, these nozzles are designed to produce a fine mist that effectively cools the surrounding area while using minimal water. This promotes water conservation and reduces wastage
• Universal Compatibility: The 10/24 UNC thread is a widely used standard in the misting industry. This means that these misting nozzles will likely be compatible with most misting systems or accessories you may already have or plan to purchase in the future
• Versatility: The kit includes 20 misting nozzles, providing you with enough options to cover a large area or distribute them across multiple zones. This flexibility allows you to customize your misting system to suit your specific needs

Related Articles

• Water Mister with Water-Efficient Designs
• How Does The Outdoor Mister Plan The Cooling Area?
• Install Outdoor Mister 3/4 or 1/2 Hose